Autel Maxilink ML629 Car Diagnostic Tool
Autel Maxilink ML629 Car Diagnostic Tool Original price was: UGX600,000.Current price is: UGX550,000.
Back to products
Launch CRP129HD Truck Diagnosis Tool Original price was: UGX1,950,000.Current price is: UGX1,750,000.

Launch CRP909E Car Diagnostic Tool

Original price was: UGX1,650,000.Current price is: UGX1,450,000.

  • Does Full System Diagnosis
  • 28 Special functions
  • Full OBD2 functions
  • Generates Reports
  • Works for 108 Car Brands
  • Live Data Streaming
Weight 0.8 kg


EAN: 2000000197722 SKU: LaunchCRP909E Categories: ,
EAN: 2000000197722 SKU: LaunchCRP909E Categories: ,

car scanner


  • 2 Year Free Update Online
  • Support Full Systems Diagnosis 15 Reset Functions
  • Android 7.1 Systems, 7” Touch Screen, 6000mAh Battery
  • Wide Vehicle Coverage. can work on over 108 car brands, over 10000 cars in the world
  • Multi-Language Supported: English, French, Spanish, Russian, Japanese, German, Italian, Portuguese, Korean, etc


1. Full System Diagnosis

This option allows you to detect whether the car full system parameters are normal or not. It mainly includes Drive System, Chassis System, Body System, Electrical system.

  • PCM(Drive System): Engine, Transmission, Transfer case, Electrical Machine Electronics, Fuel Pump, Gear, and more…
  • Chassis System: Accumulator Management Electronics, Steering, Integrated Chassis Management, Tyre Pressure Control, Active Cruise Control, Braking System, Suspension, TPMS and more…
  • BCM(Body System): SRS Airbag, Camera, Audio Radio, Gateway, Cluster Dashboard, Rain Sensors, Charging Interface Module, Parking Assistance, Power Control Unit, Touch box, Light, Battery Charging System, Head up Display, Wipe Control System, Roof, Seat & Door Motor system, Immobilizer, ABS ESP system, Air Condition. Electric Windows, Telephone, and more…
  • Electrical System Including Centralized control system for engine and power transmission, Chassis integrated control and safety system, Intelligent body electronic system, Communication and information / entertainment system. Read and erase codes for all available systems, turn off MIL light (Indicator light), display live data in text, graph & analog for easy data review



car scanner

1.Oil Lamp Reset Service

2.EPB Reset: Help replace and reset the brake pad.

3.BAT battery service(BMS):Clear the fault information of low battery and make it match again

4.D.PF service 

5. SAS Steering Angel Sensor Reset: Reset the steering angle to zero to keep the car running straight.

7. ABS Bleeding: Help exhaust the air.

8. Fuel Injector Coding: Write the new injector code into the car system for correct cylinder injection quantity.

9. TPMS service: Makes sense in displaying sensor IDs from the vehicle’s ECU, inputting TPMS sensor replacement IDs and testing sensors.

10. Throttle Adaptation: Initialize the throttle actuators to the default state.

11. AFS Headlamp Reset: Initialize the adaptive headlamp system.

12. Sunroof Initialization

13. Suspension Reset: Adjust the vehicle body height sensor for level calibration.

14. Gearbox Reset: Help complete the gearbox self-learning to improve gear shifting quality.15. Gear Learning: Monitors certain camshaft position sensors signals.

16.Tire Reset: Set the size parameters of the modified or replaced tire.

17.A/F Reset: Set or learn Air/Fuel ratio parameters.

18.Adblue Reset(Diesel Engine Exhaust Gas Filter): Reset urea after the diesel exhaust treatment fluid is replaced or filled up.

19.Coolant Bleeding: Activate the electronic water pump

20.Language Change: Change vehicle system language.

21.Nox Sensor Reset: Reset catalytic converter learned value stored in ECU.

22.Stop/Start Reset: Set up the automatic start-stop function in ECU

23.Seat Calibration: Calibrate the memory in replaced or repaired seats.

24.Transport Mode: Deactivate the transport mode.

25.Windows Calibration: Perform door window matching to recover ECU initial memory.

26.AC System Relearn/Initialization 

27. HVOLBAT Reset.

28. Engine Cylinder Power balance Test .


3. Full 10 Mode OBDII/ EOBD/ JOBD Car Diagnostics Functions:

This scanner supports all 10 test modes for OBD-II cars which are great for daily repair work. The table below describes the purpose of each mode of operation:
1. Reading Codes: Show the detailed description of the Diagnostic Trouble Code (DTCs)
2. Erasing Codes & Reset: Turns off Check Engine Light (MIL), clears codes and resets monitors.
3. Data Stream: Reads and displays live ECU/ PCM data stream, plotting functions graphically and stores freeze frame data.
4. I/M Readiness Status: Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
5. Read Live Data Stream: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6. View Freeze Frame Data: Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
7. O2 Sensor Test: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
8. On-Board Monitor Test: Retrieves and displays test results for emission-related powertrain components and systems.
9. Read Vehicle Information: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
10. Component Test: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.


Live Data Stream Graphing/Record/Playback/Sharing+ One-Click WiFi Update +Auto VIN Tech:

Gain insight into automated diagnostics with Live data graphs and health reports. With WIFI connectivity, you can update your software anytime anywhere and share diagnostic reports via email with ease. Auto VIN, once connected with the car OBD2 port, CRP909E will Auto Detect car Vin number.

LAUNCH® CRP909E  All System Code Reader WiFi Update


Wide Vehicle Coverage+10 Languages Supported: 

LAUNCH CRP909E automotive car scanner can work on over 74 car brands, over 10000+ cars in the world. This scanner is compatible with OBDII, EOBD and JOBD protocols. Can work on 12V passenger cars, pickup and light trucks.

10 kinds of languages: Spanish, Portuguese, English, Russian, German, Italian, Korean, French, Japanese, and Chinese.

What is the difference between the CRP series Scanner products?



Operating system: Android 7.0
Processor: powerful quad-core processor
Screen: 7-inch IPS touchscreen
Connectivity: Mini USB 2.0 Wi-Fi
Battery: 6100mAh polymer lithium battery
Battery life: +8hours
Product size: 9.8 x 5.5 x 1.5 (inch)
Product net weight: 700g

Package List:

  • 1pc x CRP909 Android Table
  • 1pc x OBD-II Diagnostic Cable
  • 1pc x DC Power Charging Cable
  • 1pc x User Manual
  • 1pc x Nylon bag


Weight 0.8 kg



There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.


Shipping and Delivery



Delivery Rates


1-2 Hours

UgX 7,000



UgX 10,000


1-3 Hours

UgX 10,000

Other Districts

1-3 Days

UgX 20,000

Please Note:

Indicated delivery time are valid for orders  placed before:

  • 5pm -Kampala
  • 4pm -Wakiso
  • 3pm-Mukono
  • Midday – Rest of Ugand